The Color Force 12 features a built-in power supply which can operate as a stand-alone unit or remotely controlled through ANSI E1.11 USITT DMX 512-A protocol.

General
LED cells: 2
CRI: 92
Optics: Specialised close focus lens
Beam angle: 23° (approx.)
With optional Cyc lens: 80 x 30° (approx.)
With optional Border lens: 60° (approx.)
Beam dispersion: Symmetrical direct illumination
CCT: Adjustable 1,000 – 10,000K
Color Gamut: Performance enhanced
Lamp life: L70 up to 50,000 hours
Data connectors in/out: XLR 5-pin
Control protocol: ANSI E1.1 DMX-512A

Power
Requirement: 100-240V AC, 50-60Hz, 120W
Power connector in/out: PowerCon

Physical
Dimensions: 13”W x 5″H x 9″D (335 x 190 x 218mm)
Weight: 9 lbs (4kg)
Built-in hardware: Quick release lever for tilt adjustment
Construction: Anodised aluminium extrusion
Color: Black

Environmental
Cooling system: Forced – 1 fan
IP rating: IP20

Certifications
CE Pending for CISPR 22/EN55022 &
CISPR 24/EN55024
Electrical Pending for CSA C22, UL1573, UL8750

The post Color Force 12 Rentals appeared first on AV Rental Orlando.

The post ETC Colors Spot LED Leko appeared first on AV Rental Orlando.

The post ETC ColorSource PAR – RGB-L LED Wash Light appeared first on AV Rental Orlando.

The post ColorBlast 12 TR Rentals appeared first on AV Rental Orlando.

Designed with live entertainment in mind, iW Blast TR is the ideal intelligent white LED fixture for demanding
environments.

Output
Beam Angle: 23° / 10°
Lumens†
1469 (23° beam angle)
1679 (10° beam angle)
Color Temperature: 2700 K (+/- 145) – 6500 K (+/- 275)
Efficiency (Lm/W)
29.4 (23° beam angle)
33.6 (10° beam angle)
Mixing Distance: 6″ to uniform light
CRI: 83 all, 83 warm, 74 cool
Lumen Maintenance‡: 70,000 hours L70 @ 25° C (typical application)

Electrical
Input Voltage: 24 VDC via PDS-750 TR
Power Consumption: 50 W maximum at full output, steady state

Control
Interface: PDS-750 TR
Control System: Philips full range of DMX controllers, or other third party DMX controllers

Lens
Frosted glass (23º)
Clear glass (10º)
Fixture Connections: 6′ power / data cable with 4-pin XLR connector

Temperature
Operating: -40° – 122°F
Startup: -4° – 122°F
Humidity 0 – 95%, non-condensing
Environment: Dry Location, IP20

Physical
Housing: Die-cast aluminium, black powder-coated finish
Maximum Cable Length: Up to 54′ extension for total of 60′ maximum

Certification and Safety
Certification: UL / cUL, FCC Class B, CE
LED Class: Class 2 LED product

† Lumen measurement complies with IES LM-79-08 testing procedures
‡ L70 = 70% maintenance of lumen output. (When light output drops below 70% of initial output.)

The post Color Kinetics iW Blast TR Rentals appeared first on AV Rental Orlando.

Dimensions:  6′ long

Color Range: 16.7 million (24 bit) additive RGB colors; continuously variable intensity output range
Source: High intensity light emitting diodes (LEDs)
Beam angle: 10°
Housing: Extruded aluminum with black finish
Power Connector: IEC 15A (max) with C13 plug, UL/cUL rated 2-pole, 3-wire, grounded, 15A, flying leads
Data Connectors: RJ45 or XLR-5
Listings: UL/cUL, CE, PSE

Communication
Data Interface: DMX512
control: Color Kinetics full line of DMX controllers or other DMX512 (RS485) controllers

Electrical
voltage Requirement: 100-240VAC
Power Consumption: 420W, 3.7A nominal at full intensity (full RGB)

Environmental
Operating Temperature Range: -40°F to 122°F
Starting Temperature: 14°F to 122°F
Exposure: Dry

The post ColorBlaze 72 Rentals appeared first on AV Rental Orlando.

Dynamic Effects

Color mixing: RGBAW
Red: 0 – 100%
Green: 0 – 100%
Blue: 0 – 100%
Amber: 0 – 100%
White: 0 – 100%

Control and Programming
Color control modes: RGBAW, RGB, HSI, HSIC
DMX channels: 3 – 30
Grouped pixel control options: 6 x 1 (individual), 3 x 2, 2 x 3 or 1 x 6 (all as one group) pixels
DMX address setting: Manual, auto addressing and auto address copy
Fixture setup: Onboard control panel with display
Display: Battery-powered backlit LCD, 2 x 16 characters
16-bit control (internal): RGBAW, RGB, HSI, HSIC
Protocol: USITT DMX512-A
Receiver: RS-485
Firmware update: Serial upload via DMX link

Photometric Data
Light source: Luxeon K2 high power emitters
LED power per pixel: 2 x 1.2 W red, 2 x 2.9 W green, 2 x 2.9 W royal blue, 2 x 1.2 W amber, 1 x 2.9 W white
Total LED power per bar: 116 W
Even pitch across adjacent fixtures: Horizontal/vertical (Stagebar 54L), horizontal (Stagebar 54S)
Total output (max.): 1900 lm

Construction
Color: Black
Housing: Steel and aluminum
Finish: Electrostatic powder-coated
Protection rating: IP20

Installation
Mounting points: Adjustable mounting bracket, 1/4-turn locks, four M6 threaded holes
Orientation: Any

Connections
Power in/out: Neutrik Powercon
Data in/out: RJ-45

Electrical
AC power: 100-240 V nominal, 50/60 Hz
Power supply unit: Integrated, auto-sensing multi-voltage
Power output fuse: 15 AT (slow blow)
Main fuse: 4 AT (slow blow)

Thermal
Cooling: Filtered forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 104° F
Minimum ambient temperature (Ta min.): 41° F
Maximum surface temperature, steady state, Ta=104°F: 167° F
Total heat dissipation (calculated, +/- 10%): 860 BTU/hr.

Acoustic
Noise level: <40 dBA at 3.3 ft., steady state, Ta 77° F

Licensing
Available under license from Color Kinetics Incorporated

Approvals
EU safety: EN 60598-1, EN 60598-2-17, IEC/EN 60825-1
EU EMC: EN 55 015, EN 55 103-1, EN 55 103-2
US safety: ANSI/UL 1573
Canadian safety: CAN/CSA E 60598-2-17

The post Martin Pro Stagebar 54S Rentals appeared first on AV Rental Orlando.