HD Projection System Rental

The Panasonic PT-DZ12000U 12,000 ANSI Lumen Full-HD DLP Projection system rental hire is an excellent choice for large venue events.

 

With 12,000 ANSI lumens, up to 5000:1 contrast ratio, and a Detail Clarity Processor, this projector delivers sharp, lifelike, large-screen images at native WUXGA resolution.

Four-lamp optical and 3-chip DLP® system ensure solid reliability, while an intuitive Geometric Adjustment function and built-in Multi-screen Support System make edge blending and curved screen "warped" projection easy and cost-effective for any event.

A full suite of lenses is available for flexible installations, including the following:
ET-D75LE1: 1.5–2.0 zoom
ET-D75LE2: 2.0–3.0 zoom
ET-D75LE3: 3.0–5.0 zoom
ET-D75LE4: 5.0–8.0 zoom
ET-D75LE5: 0.8:1 fixed
ET-D75LE6: 1.0–1.2 zoom
ET-D75LE8: 8.0–15.0:1 zoom

 

General
Display method: DLP™ chip x 3 (R, G, B), DLP™ projection system
Panel size: 0.96˝ diagonal
Aspect ratio: 16:10
Pixels: 2,304,000 (1,920 x 1,200) x 3, total of 6,912,000 pixels
Lens: Optional powered zoom/focus lenses
Lamp: 300 W UHM™ lamp x 4
Screen size: 70- 600 inches, 16:10 aspect ratio (70 - 300 inches with the ET-D75LE5, 16:10 aspect ratio)
Brightness*1: 12,000 lumens (four-lamp operation mode)
Center-to-corner uniformity*1: 90%
Contrast*1: 5,000:1 (full on/full off, in dynamic iris 3 mode)
Resolution: 1,920 x 1,200 pixels (Input signals that exceed this resolution will be converted to 1,920 x 1,200 pixels.)

Scanning frequencies
RGB
Horizontal: 15-100 kHz
Vertical: 24- 120 Hz*2
Dot clock: 20-162 MHz
YPBPR (YCBCR)
480i: fH 15.75 kHz; fV 60 Hz, 576i: fH 15.63 kHz; fV 50 Hz
480p: fH 31.50 kHz; fV 60 Hz, 576p: fH 31.25 kHz; fV 50 Hz
720/60p: fH 45.00 kHz; fV 60 Hz, 720/50p: fH 37.50 kHz; fV 50 Hz
1035/60i: fH 33.75 kHz; fV 60 Hz, 1080/60i: fH 33.75 kHz; fV 60 Hz
1080/50i: fH 28.13 kHz; fV 50 Hz, 1080/25p: fH 28.13 kHz; fV 25 Hz
1080/24p: fH 27.00 kHz; fV 24 Hz, 1080/24sF: fH 27.00 kHz; fV 48 Hz
1080/30p: fH 33.75 kHz; fV 30 Hz, 1080/60p: fH 67.50 kHz; fV 60 Hz
1080/50p: fH 56.25 kHz; fV 50 Hz
S-Video/Video
Horizontal: 15.75/15.63 kHz
Vertical: 50/60 Hz
(NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM)

Optical axis shift*3:    
Vertical: ±55% (±44% with the ET-D75LE6) from center of screen, powered
Horizontal: ±20% (±15% with the ET-D75LE6) from center of screen, powered
Keystone correction range
Vertical: ±40° (±22° with the ET-D75LE5, ±28° wih the ET-D75LE6)
With geometric adjustment: vertical ±10°, horizontal ±15°

Terminals 
DVI-D IN: DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, compatible with single link only.
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p
VGA (640 x 480) - WUXGA  (1,920 x 1,200), compatible with non-    interlaced signals only, dot clock: 25-162 MHz
RGB1 IN: BNC x 5
G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75Ω
B, R: 0.7 Vp-p, 75Ω
HD, VD, SYNC: 1.4-5.0 Vp-p, positive/negative automatic
Y, PB, PR
Y: 1.0 p-p, 75Ω (incl. sync signal)
PB/PR: 0.7 Vp-p, 75Ω, 0.7 Vp-p (1.0 Vp-p for sync on G), 75Ω
NOTE: HD/SYNC, and VD terminals do not accept 3-value direct sync signals.
RGB2 IN: D-sub HD 15-pin x 1
R, G, B: 0.7 Vp-p (1.0 Vp-p for sync on G), 75Ω
HD, VD, SYNC: TTL, high impedance, positive/negative automatic
VD: 1.4-5.0 Vp-p, positive/negative automatic, 75Ω
Y, PB, PR
Y: 1.0 p-p, 75Ω (incl. sync signal)
PB/PR: 0.7 Vp-p, 75Ω
NOTE: HD/SYNC, and VD terminals do not accept 3-value direct sync signals.
VIDEO IN: BNC x 1, 1.0 Vp-p, 75Ω
VIDEO OUT: BNC x 1, 1.0 Vp-p, active through
S-VIDEO IN: Mini DIN 4-pin x 1
Y: 1.0 Vp-p, C: 0.286 Vp-p, 75Ω (S1 signal compatible)
LAN: RJ-45 x 1, 10Base-T/100Base-TX, compatible with PJLink™ (class 1)
SERIAL IN*5: D-sub 9-pin (female) x 2, for external control (RS-232C/RS-422 compliant)
SERIAL OUT*5: D-sub 9-pin (male) x 1, for link control
REMOTE 1 IN: M3 jack x 1 for wired remote control
REMOTE 1 OUT: M3 jack x 1 for link control
REMOTE 2 IN: D-sub 9-pin x 1 for external control (parallel)

Optional board slot*6:    
With ET-MD77SD1 installed
SERIAL IN: BNC x 1
SD-SDI signal (YCBCR 4:2:2 10-bit): SMPTE 259M compliant: 480i, 576i
SERIAL OUT: BNC x 1, active through
With ET-MD77SD3 installed
SERIAL IN: BNC x 1
SD-SDI signal (YCBCR 4:2:2 10-bit): SMPTE 259M compliant: 480i, 576i
Single-link HD-SDI signal (YCBCR 4:2:2 10-bit)
SMPTE 292M compliant: 720/50p, 720/60p, 1035/60i, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 080/24sF, 1080/30p
SERIAL OUT: BNC x 1, active through
With ET-MD100SD4 installed
Link A/Link B IN: BNC x 1 for each
SD-SDI signal (YCBCR 4:2:2 10-bit): SMPTE 259M compliant: 480i, 576i
Single-link HD-SDI signal (YCBCR 4:2:2 10-bit)
SMPTE 292M compiant: 720/50p, 720/60p, 1080/50i, 1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
Dual-link HD-SDI signal (RGB 4:4:4 12-bit/10-bit)
SMPTE 372M compiant: 1920 x 1080/50i, 1920 x 1080/60i, 1920 x 1080/25p, 1920 x 1080/24p
1920 x 1080/24sF, 1920 x 1080/30p
Dual-link HD-SDI signal (X´Y´Z´ 4:4:4 12-bit): 2048 x 1080/24p, 2048 x 1080/24sF
With ET-MD77DV installed
DVI-D IN: DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, compatible with single link only
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p
VGA (640 x 480) - WUXGA  (1,920 x 1,200), compatible with non-interlaced signals only.
Dot clock: 25-162 MHz

Remote Control Unit 
Number of functions: 35 keys, 39 functions
Power supply: 3 V DC (AA battery x 2)
Operation range*9: Approx. 98.4´ (30 m) when pointed directly toward signal receiver
Dimensions: 7"H x 2"W x 0.88"D (176 x 51 x 22.7 mm)
Weight: 4.7 oz (134 g) (including batteries)

Power
Supply
North America: 120-240 V AC, 16-9.0 A, 50/60 Hz (3-wire single-phase)
Europe, Asia: 220-240 V AC, 9.5 A, 50/60 Hz (3-wire single-phase)
Consumption
North America: 1,600-1,500 W (10-15 W in standby mode with fan stopped)
Europe, Asia: 1,500 W (15 W in standby mode with fan stopped)
Power cord: 9.8´ (3 m)

Physical
Dimensions: 22.75"W x 12.59"H" x 25. 31"D (578 x 320 x 643 mm) without lens
Weight: Approx 77.2 lbs (35 kg) without lens
Cabinet material: Moulded plastic
Installation: Ceiling/floor, front/rear

Environmental
Operating temperature*8: 32°F-113°F (0°C-45°C)
Operating humidity:    10%-80% (no condensation)

Optional Accessories    
Zoom lens (0.9 -1.1:1): ET-D75LE6
Zoom lens (1.4 -1.8:1): ET-D75LE1
Zoom lens (1.8 - 2.8:1): ET-D75LE2
Zoom lens (2.8- 4.6:1): ET-D75LE3
Zoom lens (4.6-7.4:1): ET-D75LE4
Zoom lens (7.3-13.8:1): ET-D75LE8
Fixed-focus lens (0.7:1): ET-D75LE5
SD-SDI board: ET-MD77SD1
HD/SD-SDI board: ET-MD77SD3
Dual link HD-SDI board: ET-MD100SD4
DVI-D board: ET-MD77DV
Replacement lamps
ET-LAD12K (one unit)
ET-LAD12KF (a set of four lamps)
Ceiling mount brackets
For high ceilings: ET-PKD100H
For low ceilings: ET-PKD100S
Frame: ET-PFD100
Carrying handle: ET-HAD100
Smoke cut filter: ET-SFD100
Notes

  • Weights and dimensions shown are approximate. Specifications subject to change without notice.
  • Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
  • Smooth image reproduction may not be possible when a motion video signal with a vertical frequency other than 50 or 60 Hz is input.
  • Shift range is limited during simultaneous horizontal and vertical shifting.
  • WUXGA resolution is supported only when the signals are compliant with VESA CVT-RB (Coordinated Video Timing-Reduced Blanking).
  • Contact your dealers for details when the control using RS-232C or RS-422 is required.
  • The LAN terminal on the optional board will be inactivated after installation. Use the LAN terminal on the main unit.
  • Average value. May differ depending on models.
  • The operating temperature range is 0°C (32°F) to 40°C (104°F) when used in High-Altitude mode (1,400 m [4,593 feet] to 2,700 m [8,858 feet]).
  • Also, if the ambient temperature exceeds 40°C (104°F) (35°C [95°F] in High-Altitude mode) when using all four lamps, the light output may be
  • reduced approximately 30% to protect the projector.
  • Operation range differs depending on environments.

12,000 Lumen, 1920x1200 Full-HD DLP Projection system rental hire in Orlando Florida. 3-chip DLP® system w/ advanced blending, stacking and warp technologies.

Price: $0.00

Loading Updating cart...

 

Designed by Brevard Search