Martin Pro MAC Aura Rentals

The Martin Professional MAC Aura rental hire in Orlando is the first compact LED moving head wash light with zoom that offers never-before-seen, eye-catching aura effects yet also functions as a highly capable single-lens wash with fully pre-mixed color. A ground-breaking optical system combines multicolor LEDs with backlight aura color mixing to produce an all new visual palette that takes the synthetic look out of LED for truly unique lighting designs.
Note: Limited quantities; call us for availability.

 

General
Total output: 3850 lumens (zoom at maximum)
Dynamic Effects
Beam color mixing: RGBW
Aura (secondary lens array illumination) color mixing: RGB
Beam color temperature control: CTO, variable 10 000 - 2500 K
Beam and aura electronic 'color wheel' effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color
Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects
Pre-programmed effects: Range of synchronized and independent beam and aura FX, different FX can be combined
Electronic dimming: Independent beam and aura, four dimming curve options
Zoom: 11° - 58° (one-tenth peak angle)
Pan: 540°
Tilt: 232°
Pan and tilt speed: Adjustable via onboard control panel and DMX

Optics
Light source: Osram Ostar high-power emitters
LED refresh rate: Beam 1220 Hz, aura 4395 Hz
Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
*Manufacturer´s figure obtained under manufacturer´s test conditions

Control and Programming

Control options: Independent control of beam (primary output) and aura (secondary lens array illumination)
Macro programs selectable via DMX: Synchronized beam and aura effects
Control: DMX
RDM: Implemented
Control resolution: 8-bit, with 16-bit control of pan & tilt
DMX channels: 14/25
Setting and addressing: Control panel with backlit graphic display
Protocol: USITT DMX512-A, ANSI/ESTA E1.20 RDM
Transceiver: RS-485
Fixture software update: Via DMX with Martin USB Duo DMX Interface

Connections

AC power input: Neutrik PowerCon
AC power throughput: Neutrik PowerCon
DMX and RDM data in/out: 5-pin locking XLR

Power
Requirement: 100-240 VAC nominal, 50/60 Hz
Consumption
Maximum: 260 W
All effects static, zero light output: <15 W typical
Power supply unit: Auto-ranging electronic switch mode
Main fuse: 5 AT (slow blow)
Typical Power and Current
100 V, 60 Hz: 236 W, 2.4 A, PF 0.994
120 V, 60 Hz: 234 W, 2.0 A, PF 0.992
208 V, 60 Hz: 229 W, 1.2 A, PF 0.970
230 V, 50 Hz: 228 W, 1.1 A, PF 0.959
240 V, 50 Hz: 228 W, 1.0 A, PF 0.953
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Physical

Dimensions: 11.9"L x 11.9"W x 14.2"H with head straight up (302 x 302 x 360mm)
Weight: 12.3 lbs (5.6 kg) without accessories

Construction
Color: Black
Housing: High-impact flame-retardant thermoplastic
Protection rating: IP20

Installation
Mounting points: One M12 threaded hole for rigging clamp
Location: Indoor use only, must be fastened to surface or structure
Orientation: Any
Minimum distance to combustible materials: 100 mm (3.9 in.)
Minimum distance to illuminated surfaces: 200 mm (7.9 in.)

Environmental
Maximum ambient temperature (Ta max.): 104°F (40°C)
Minimum ambient temperature (Ta min.): 41°F (5°C)
Total heat dissipation (calculated, +/- 10%): 880 BTU/hr.
Cooling: Forced air (temperature-regulated, low noise, user-definable levels)

Certifications
EU safety: EN 60598-2-17 (EN 60598-1), EN 62471
EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547
US safety: UL 1573
US EMC: FCC Part 15 Class A
Canadian safety: CSA E598-2-17 (CSA E60598-1)
Canadian EMC: ICES-003 Class A
Australia/NZ: C-TICK N4241

Loading Updating cart...