9999 in stock

This professional, wireless receiver system is engineered for the most demanding applications or installations and is available for rental hire in Orlando Florida. Offering unprecedented flexibility and versatility, it uses multiple frequency bands, so that up to160 compatible systems can be used simultaneously.
Individual frequency bands deliver up to 60 compatible systems per band. The unit also includes infrared synchronization that allows you to configure transmitter settings from the receiver. It is compatible with Shure UR1 beltpack and UR2 handheld mics.

Audio Frequency Response
40 - 18,000 Hz, (+1 dB, -3 dB)
NOTE: Overall system frequency response depends on the microphone element

Gain Adjustment Range
UR1: -20 to +35 dB
UR2: -10 to +20 dB

Modulation: FM (45 kHz max. deviation), compander system with pre- and de-emphasis
Dynamic Range: >105 dB, A-weighted
Image Rejection: >110 dB typical

RF Sensitivity
-107 dBm Typical, 12 dB SINAD
-102 dBm Typical, 30 dB SINAD

Spurious Rejection: >90 dB typical
Ultimate Quieting (ref. 45 kHz deviation): >100 dB, A-weighted

Signal Polarity
Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on XLR output pin 2 with respect to XLR pin 3 and on the tip of the 1/4-inch output jack.

System Distortion (ref. ± 45 kHz deviation, 1 kHz modulation): <0.3% Total Harmonic Distortion typical

Power Requirements: 100 to 240 Vac, 50/60 Hz
Current Drain: 0.8 Amps max.

Operating Temperature Range: 0° to +135°F
NOTE: Battery characteristics may limit this range

NOTE: Electrical safety approval is based on a maximum ambient temperature of 35°C (95°F).

Housing: Galvanized steel

Authorized under the Declaration Of Conformity
provision of FCC Part 15. Certified under Industry Canada to RSS-123 ("IC: 616A-UR4"). Meets the essential requirements of  the European R&TTE Directive 99/5/EC (EN 301 489 Parts 1 & 9, EN 300 422 Parts 1 and 2). Eligible to carry the CE marking. Conforms to Australian EMC requirements and is eligible for C-Tick marking N-108. Granted the following Country Safety  Approvals: cULus Mark for US and Canada: Meets UL6500 and CSA/CAN E60065. UL GS-Certified to EN60065.

Receiver Input
Connector Type: BNC Antenna, IEC Power
Actual Impedance: 50Ω
Nominal Input Level: -95 to -30 dBm, with power 100-240 VAC,50/60 Hz
Maximum Input Level: -20 dBm 240 VAC, + 10%, with power 240 VAC, +10%, 50/60 Hz

Pin Assignments with IEC standard power
Shell = Ground
Center = Signal

Bias Voltage for remote antenna amplifiers: 12.2 Vdc @ 150 mA maximum

Receiver Input
Antenna Power
Connector Type BNC IEC
Actual Impedance 50 Ω
Nominal Input Level –95 to –30 dBm 100-240 VAC, 50/60 Hz
Maximum Input Level –20 dBm 240 VAC, +10%, 50/60 Hz
Pin Assignments Shell = Ground
Center = Signal
IEC Standard
Bias Voltage* 12.2 Vdc @ 150 mA max N/A
Receiver Audio Output
Monitor (1/4” Headphone) 1/4” Phone  XLR
Output Configuration Unbalanced mono, 1/4 inch Impedance Balanced Electrically Balanced
Actual Impedance 50 Ω 200 Ω 200 Ω (active balanced) (150 Ω mic)
Maximum Output Level 1 Watt @ 63 Ω +18 dBu +24 dBu (-6 dBu mic) with 100 Hz modulating tone
Pin Assignments: Tip=Hot
Ring = Hot
Sleeve = Gnd
Ring = Hot
Sleeve = Gnd
1 = Ground
2 = Audio +
3 = Audio –
Phantom Power Protection? No Yes Yes

Computer/Network Interface
Ethernet: RJ45
USB: Series B Receptacle

Additional information

Weight 10.6 kg
Dimensions 14.39 × 19 × 1.72 cm