9999 in stock

This professional panel takes your LCD video walls to new levels of impact. Its ultra-narrow bezel allows for a screen-to-screen distance between two neighboring displays of only 7.3mm, a near 450% improvement from NEC’s previously revolutionary 33mm P Series displays. Ideal for digital signage and broadcast applications, the display can be deployed in video wall matrices of up to 10x10 (100 displays), creating a total surface area of approximately 645 square feet.The barely-discernable transition gap between displays – along with EdgeComp™ technology – ensures a homogenous picture across the matrix.
Display 
Panel Technology: SPVA (P-DID)
Viewable Image Size: 46"
Native Resolution
Single Panel: 1366 x 768
2x2 Matrix: 1920 x 1080
Pixel Pitch: 0.75mm
Backlight Type: CCFL
Pixels Per Inch: 33@ native resolution
Brightness (typical): 500cd/m2
Contrast Ratio (typical): 3000:1
Viewing Angle:178° vertical and horizontal @ CR>10
Response Time (Gray to Gray): 8ms
Refresh Rate: 60Hz
Aspect Ratio: 16:9
Active Screen Area: 40.1" x 22.5" (1018.4 x 572.5mm)
Orientation: Landscape/Portrait
Displayable Colors: More than 16.7 millionSynchronization Range
Horizontal (Analog/Digital): 31.5-91.1 kHz
Vertical: 50-85 HzInput Signal   
Video: Analog RGB 0.7 Vp-p/75 Ohms
Sync
Separate sync: TTL Level (Positive/Negative)
Composite sync: TTL Level (Positive/Negative)
Composite sync on green: (0.3Vp-p negative 0.7Vp-p positive)

Connectivity  
PC Signal Compatibility: Yes
Macintosh Compatibility: Yes

Input Terminals    
Digital: DisplayPort, HDMI, DVI-D
Analog: VGA 15-pin D-sub, 5 BNC (RGBHV, DVD/HD or Video), RCA Composite, BNC Composite, RCA (Y, Cb/Pb, Cr/Pr) Component, S-Video
Audio: RCA Audio (2), Stereo Mini-Jack, HDMI Audio, DisplayPort Audio
External Control: RS-232C, LAN, IR Remote, DDC/CI

Output Terminals  
Analog: 5 BNC (RGBHV, DVD/HD or Video), BNC Composite
Audio: RCA Audio
External Control: RS-232C, IR Remote

Additional Features
Sealed panel design
Expansion slot
TileComp
Separate group/Monitor ID function
CableComp+
Ethernet Control and Communication
RS-232 Control and Communication
Carbon footprint meter
Plug and Play (DDC/CI, DDC2B)
Scheduler (w/ real-time clock)
Sharpness/softness adjustment
Screen saver function
Ambient light sensor (AmbiBright)
Metal rear cabinet
POP
Side-by-Side
Kensington lock
Handles
Variable picture modes
Input labeling
Backlight adjust
Aspect ratio control

Power
Requirement: 100-120V AC (3.6A); 220-240V AC (1.45A)
Panel Consumption: 200W typcial, 330W max BTU’s: 1127 BTU/hour
Quad Power Consumption: 1320W (max) Quad BTU’s: 4508 BTU/hour
ECO Mode Standby: <2W

Physical Specifications   
Dimensions (WxHxD)
40.4"W x 24.6"H x 13.8"D (1025.7 x 623.6 x 351mm) with stand
40.4"W x 22.8"H x 5"D (1025.7 x 579.8 x 128.1mm) without
Weight
With stand: 68.8 lbs. / 31.2 kg
Without stand: 64.6 lbs. / 29.3 kg
Quad Dimensions: 80.7”(W) x 45.6”(H) x 5.0”(D)
Quad Weight: 258.4 lbs
Bezel Width (Left/Right, Top/Bottom): 0.2 in./0.1 in., 0.2 in./0.1 in. ; 5mm/3mm, 5mm/3mm
VESA Hole Configuration: 300 x 300mm (4-hole)

Environmental Conditions  
Operating
Temperature: 41° to 104°F (5° to 40°C)
Humidity: 20 to 80%
Altitude: 9843 feet (3000m)
Storage
Temperature: -4° to 140°F / (-20° to 60°C)
Humidity: 10 to 90%
Altitude: 40,000 ft. (12,192m)

Additional information

Weight 64.6 kg
Dimensions 5 × 40.4 × 22.8 cm